Submersible or capacitive evaporators allow you to get the vapor phase of liquefied gas directly in the tank itself using regasifiers - immersion heaters. Antifreeze or antifreeze is usually used as a coolant, the heating of which is controlled by a thermal sensor.
Pressure control in the vessel with the GRE head is carried out by an electrocontact manometer -EKM. When the pressure reaches 1.0 MPa, the EKM turns off the electric heater, and when the pressure drops to 0.3 MPa, the electric heater turns on again. The automatic equipment of the GRI head, controlling the gas pressure in the tank, ensures the timely switching on / off of the electric heater: when the temperature in the glass with the intermediate heat carrier reaches more than 90 ° C, and when the level of LPG in the tank is below 40%.
The lineup:
GRI-2.5
GRI-5
GRI (C) -2.5
GRI (C) -5
GRI
GR-2.5 (5)